A 16-bit Pressure Sensing Interface Integrating a 460 fJ/conv Incremental Sigma Delta ADC for Medical Devices

Johan Solis-Arbustini, Pablo Mendoza-Ponce, Wolfgang H. Krautschneider, Matthias Kuhl

Producción científica: Capítulo del libro/informe/acta de congresoContribución a la conferenciarevisión exhaustiva

Resumen

This work presents an incremental 2nd-order sigma delta using a single operational transconductance amplifier. This design provides a good trade-off between time conversion, high bit resolution, power consumption and area utilization for a pressure sensing reading interface. The modulator, designed in 180 nm CMOS technology, has been optimized for low area utilization, occupying only 0.058 mm2. Post-layout simulations were performed showing a resolution of 150 μV while consuming 120 μW and 460 fJ/conv. The system has a resolution of 16 bits, a bandwidth of 2 kHz, an oversampling ratio of 512 and a sampling frequency of 2 MHz.

Idioma originalInglés
Título de la publicación alojada2020 IEEE 11th Latin American Symposium on Circuits and Systems, LASCAS 2020
EditorialInstitute of Electrical and Electronics Engineers Inc.
ISBN (versión digital)9781728134277
DOI
EstadoPublicada - feb 2020
Evento11th IEEE Latin American Symposium on Circuits and Systems, LASCAS 2020 - San Jose, Costa Rica
Duración: 25 feb 202028 feb 2020

Serie de la publicación

Nombre2020 IEEE 11th Latin American Symposium on Circuits and Systems, LASCAS 2020

Conferencia

Conferencia11th IEEE Latin American Symposium on Circuits and Systems, LASCAS 2020
País/TerritorioCosta Rica
CiudadSan Jose
Período25/02/2028/02/20

Huella

Profundice en los temas de investigación de 'A 16-bit Pressure Sensing Interface Integrating a 460 fJ/conv Incremental Sigma Delta ADC for Medical Devices'. En conjunto forman una huella única.

Citar esto